图书馆订购 Guest
主页 旧刊 Thermal Letter 有关人员 未来大会 IHTC汇编
International Heat Transfer Conference 13

ISSN: 2377-424X (online)
ISSN: 2377-4371 (flashdrive)

FLOW PATTERN AND VOID FRACTION IN AN ADVANCED TWO-PHASE FLOW THERMOSYPHON LOOP

Rahmatollah Khodabandeh
Royal Institute of Technology (KTH), Stockholm, Sweden

D. Haglind
Royal Institute of Technology (KTH), Stockholm, Sweden

Björn Palm
Royal Institute of Technology (KTH); Department of Energy Technology, Brinellvagen 60,100 44 Stockholm, Sweden

DOI: 10.1615/IHTC13.p12.150
11 pages

摘要

Gas-liquid two-phase flow pattern is visualized for Isobutane in semi-circular tubes of 1.41 mm hydraulic diameter and height of 13.6 mm at heat flux ranging from 4.2 to 291.3 kW/m2 to the system. The evaporator is made of a copper half and a glass half, which have been glued together. The glass half enabled the visualization of the flow. In order to visualize the flow regime and measure the void fraction in the riser, a glass tube riser is used. To measure the void fraction in the riser a quick-closing valve method is used. Interesting phenomena, such as the possible occurrence of partial dryout and backflow is also discussed. The result from this experiment is compared with the available two-phase flow map for large diameter channel.
In order to investigate the influence of pressure level on flow pattern, different reduced pressures are used.

Purchase $25.00 Check subscription 下载MARC 发布道德准则和不当行为 推荐给我的图书馆员 此页放入书签
 

IHTC 数据库

Measurement of fluid temperature with an arrangement of three thermocouples