Customer Login Shopping Cart
Library Subscription: Guest
Home Archives Thermal Letter Officers Future meetings Assembly for International Heat Transfer Conferences

ISBN : 1-56032-797-9

International Heat Transfer Conference 11
1998, 23-28 August, Kyongju, Korea

Applied Heat Transfer

Table of Contents:

SLAGGING ASSESSMENT OF POWER PLANT BOILER WITH KNOWLEDGE BASED SYSTEM Naim Hamdia Afgan, Xiuguang He, Maria da Graca Carvalho, Joao Luis Toste Azevedo pages 3-8 DOI: 10.1615/IHTC11.10
NUMERICAL INVESTIGATION OF EXCIMER LASER ABLATION OF NICKEL AND COMPARISON WITH EXPERIMENTAL STUDY Guofei Chen , Xianfan Xu pages 9-14 DOI: 10.1615/IHTC11.20
EXPERIMENTAL STUDY OF THE THERMAL BOUNDARY CONDITION AT THE WORKPIECE-DIE INTERFACE DURING HOT FORGING V. Goizet, Brahim Bourouga , Jean Pierre Bardon pages 15-20 DOI: 10.1615/IHTC11.30
THERMAL ANALYSIS OF PORTABLE ELECTRONIC EQUIPMENT Katsumi Hisano, Hideo Iwasaki, Masaru Ishizuka pages 21-25 DOI: 10.1615/IHTC11.40
A NUMERICAL INVESTIGATION OF NON-ISOTHERMAL EXTRUSION THROUGH ANNULAR DIES - INFLUENCE OF WALL TEMPERATURES ON EXTRUDATE SWELL B. Phuoc Huynh pages 27-32 DOI: 10.1615/IHTC11.50
ENTROPY GENERATION MINIMIZATION ON CIC (CABLE-IN-CONDUIT) SUPERCONDUCTOR DESIGN Sangkwon Jeong pages 33-38 DOI: 10.1615/IHTC11.60
NUMERICAL ANALYSIS OF LOCAL HUMAN RESPONSE TO WARM AND HUMID ENVIRONMENT IN A CROWDED ENCLOSURE Zhi Jian Kang, Hong Xue, Tet-Yin Bong pages 39-43 DOI: 10.1615/IHTC11.70
HIGH TEMPERATURE HEAT STORAGE AND TEMPERATURE UPGRADING BY MEANS OF BaO/CO2/BaCO3 TYPE CHEMICAL HEAT PUMP Mitsuhiro Kubota, Fujio Watanabe, Masanobu Hasatani, Kyaw Kyaw , Hitoki Matsuda pages 45-50 DOI: 10.1615/IHTC11.80
THE INFLUENCE OF GEOMETRY ON FLOW AND HEAT TRANSFER IN AN AXISYMMETRIEC I.C. ENGINE PORT ASSEMBLY A. Maier, T.H. Sheldrake , D. Wilcock pages 51-56 DOI: 10.1615/IHTC11.90
FUNDAMENTAL INVESTIGATIONS OF SULPHURIC ACID DECOMPOSITION IN VOLUMETRIC RECEIVERS R. Nowak, O. Unruh , P. Roosen pages 57-62 DOI: 10.1615/IHTC11.100
EFFECTS OF THERMO CAPILLARY STRESSES ON THE CAPILLARY LIMIT OF CAPILLARY-DRIVEN HEAT TRANSFER DEVICES David M. Pratt, Won Soon Chang, Kevin P. Hallinan pages 63-67 DOI: 10.1615/IHTC11.110
EXPERIMENTAL EVALUATION OF THE HEAT TRANSFER CHARACTERISTICS OF A FLUTED TUBE USED FOR DESALINATION Thomas J. Rohloff , Ivan Catton pages 69-74 DOI: 10.1615/IHTC11.120
THERMODYNAMICAL EXPLANATION OF DISSOLUTION MECHANISM OF LIQUID CO2 WITH CLATHRATE-HYDRATE FILM Yutaka Tabe, Shuichiro Hirai, Ken Okazaki, Katsuyuki Kawamura, Kunio Hijikata pages 75-80 DOI: 10.1615/IHTC11.130
NONEQUILIBRIUM THERMODYNAMIC BEHAVIOR AT THE INTERFACE BETWEEN STEAM FILM ON THE SURFACE OF HIGH TEMPERATURE PREMIXING LIQUID DROP AND THE SURROUNDING WATER DURING STEAM EXPLOSION Hiromichi Adachi, Yousuke Matsukuma, Masahiro Abe , Yutaka Abe pages 81-86 DOI: 10.1615/IHTC11.140
OPTIMAL THERMAL PROCESSING OF COMPOSITE MATERIALS: AN INVERSE ALGORITHM AND ITS EXPERIMENTAL VALIDATION J-L. Bailleul, D. Delaunay, Y. Jarny pages 87-92 DOI: 10.1615/IHTC11.150
NEW BOUNDARY CONDITIONS AND EXPERIMENT ON HEAT TRANSFER AT MICROSCALE Jean Pierre Bardon, P. Guiilemet pages 93-98 DOI: 10.1615/IHTC11.160
TRANSPORT AND DEPOSITION IN MOCVD FOR THIN FILM FABRICATION OF HIGH TEMPERATURE SUPERCONDUCTORS Gregory H. Evans, Ralph Greif pages 99-104 DOI: 10.1615/IHTC11.170
SIMULATION AND OPTIMIZATION OF LOW PRESSURE CHEMICAL VAPOR DEPOSITION BATCH FURNACES FOR MICROELECTRONICS MANUFACTURING William G. Houf pages 105-110 DOI: 10.1615/IHTC11.180
EXPERIMENTAL STUDY OF ABLATION OF POLYMER MATERIAL USING EXCIMER LASER (INFLUENCE OF IRRADIATION ANGLE) Hiroshi Ishiguro, Hiroyuki YAMAMOTO, K. Kikuchi, Yukio Yamada pages 111-116 DOI: 10.1615/IHTC11.190
APPLICATION OF THE THERMAL NETWORK METHOD TO THE TRANSIENT THERMAL ANALYSIS OF MULTICHIP MODULES Masaru Ishizuka, Hideo Iwasaki, Katsumi Hisano pages 117-122 DOI: 10.1615/IHTC11.200
TEMPERATURE JUMP AT INTERFACE BETWEEN ADJACENT DIELECTRIC THIN FILMS Chun-Ping Jen , Ching-Chang Chieng pages 123-128 DOI: 10.1615/IHTC11.210
Ablation Threshold and Pressure-Pulse Generation In the Pulsed-Laser Irradiation of Absorbing-Liquid Surface Dongsik Kim , Costas Grigoropoulos pages 129-134 DOI: 10.1615/IHTC11.220
CLASSICAL AND QUANTUM HEAT TRANSPORT Mirostaw Kozfowski, Janina Marciak-Koztowska pages 135-138 DOI: 10.1615/IHTC11.230
ANALYSIS OF HEAT AND MASS TRANSFER DURING MULTI-WAFER LOW PRESSURE CHEMICAL VAPOR DEPOSITION PROCESS K.S. Park , M. Choi pages 139-144 DOI: 10.1615/IHTC11.240
RECOVERY MECHANISMS FOR STICTION-FAILED MICROCANTILEVERS USING SHORT-PULSE LASERS Leslie M. Phinney, Chang-Lin Tien pages 145-150 DOI: 10.1615/IHTC11.250
A FIRST AND SECOND LAW ANALYSIS OF PHASE CHANGE HEAT EXCHANGERS FOR ENERGY STORAGE K. Poornathresan , K.N. Ramesh , A. Venkata Ramayya pages 151-156 DOI: 10.1615/IHTC11.260
THE EFFECT OF HUMIDITY ON THE HEAT AND MASS TRANSFER ACROSS NARROW VERTICAL AIR SPACES Harry Suehrcke, Geordie D. McBain pages 157-162 DOI: 10.1615/IHTC11.270
CONVECTIVE HEAT TRANSFER AND FLOW STABILITY IN ROTATING DISK CVD REACTORS W. Winters, Gregory H. Evans, Ralph Greif pages 163-168 DOI: 10.1615/IHTC11.280
THERMAL DRYING OF HERBS AND GREEN LEAVES USING A BED-TYPE SOLAR DRYER H. Z. Abou-Ziyan, M. N. Metwally, A. M. El-Leathy pages 169-174 DOI: 10.1615/IHTC11.290
Numerical Analysis of Air Flow and Heat Transfer in Tubular-Blown Film Processing O. AKAIKE , Toshihiro Tsuji, Yasutaka Nagano pages 175-179 DOI: 10.1615/IHTC11.300
MODELING OF THE REACTIVE INFRARED DRYING OF A MODEL WATER-BASED EPOXY-AMINE PAINTING COATED ON IRON SUPPORT WITH EXPERIMENTAL VALIDATION Denise Blanc, Pierre Laurent , Julien Andrieu, Jean-Frangois Gerard pages 181-186 DOI: 10.1615/IHTC11.310
HEAT AND MASS TRANSFER IN CONTINUOUS CVD REACTORS Wilson K. S. Chiu, Yogesh Jaluria pages 187-192 DOI: 10.1615/IHTC11.320
MODELLING OF EFFICIENCY OF THERMAL EXPLOSIONS OCCURRING IN DIFFERENT CONDITIONS Tadeusz Ryszard Fodemski, Andrzej Rosiak pages 193-198 DOI: 10.1615/IHTC11.330
HEAT TRANSFER IN AN UNBAFFLED AGITATED VAT WITH A HEATING JACKET OVER PART OF THE SIDE Patrick J. Jordan, Frank C. Neubert pages 199-204 DOI: 10.1615/IHTC11.340
A MODEL OF POLYMER POWDER SINTERING INDUCED BY LASER IRRADIATION M. Kandis, C.W. Buckley, Theodore L. Bergman pages 205-210 DOI: 10.1615/IHTC11.350
THERMAL ANALYSIS OF A SILICON WAFER DURING PLASAMA ETCHING Yu-An Lin, Chin Pan pages 211-216 DOI: 10.1615/IHTC11.360
THE EFFECTS OF INTER-PARTICLE FORCE ON HEAT TRANSFER AROUND HORIZONTAL TUBE IN A FLUIDIZED BED Masahide Miyamoto, Febijanto Irhan, Shigetoshi Kakuta, Y. Katoh, J. Kurima pages 217-222 DOI: 10.1615/IHTC11.370
FEASIBILITY STUDY OF ENERGY TOWERS VIA CFD ANALYSIS Eduard J. Moses, Meir Toren , Shmuel Olek pages 223-228 DOI: 10.1615/IHTC11.380
GEOMETRY EFFECT AND TRANSIENT BEHAVIOURS ON THE OPERATION OF HEAT PIPE WITH TWO HEATERS Jong Heung Park, Seong Pal Lee pages 229-234 DOI: 10.1615/IHTC11.390
DEFINITION OF THE THERMAL BOUNDARY CONDITIONS AROUND A HIGH SPEED DIESEL ENGINE PISTON Serge Ravary, Franck Simon, Alain Alexandre, Jean-Bernard Saulnier, Dominique Joubert pages 235-240 DOI: 10.1615/IHTC11.400
NUMERICAL SOLUTION FOR THE DIFFUSION OF HIGH INTENSITY, ULTRASHORT LASER PULSES WITHIN METAL FILMS Andrew N. Smith , Pamela M. Norris pages 241-246 DOI: 10.1615/IHTC11.410
Home Archives Thermal Letter Officers Future meetings Assembly for International Heat Transfer Conferences English Русский 中文 Português Spain French German Help Contact Us Back to Begell House