Suscripción a Biblioteca: Guest
Inicio Archivos Thermal Letter Funcionarios Reuniones futuras Assembly for International Heat Transfer Conferences
International Heat Transfer Conference 10

ISSN: 2377-424X (online)
ISSN: 2377-4371 (flashdrive)


P. J. Erens
Department of Mechanical Engineering, University of Stellenbosch, South Africa

J.H. Mercker
Department of Mechanical Engineering University of Stellenbosch South Africa

A.A. Dreyer
Bureau for Mechanical Engineering, University of Stellenbosch

DOI: 10.1615/IHTC10.510
pages 305-310


A liquid drop breaking away from a feeding orifice or a liquid film and falling through a gaseous environment of lower temperature experiences simultaneous heat and mass transfer. The modelling of drop cooling rates are complicated by the transient nature of the drop motion due to acceleration, the onset of internal circulation inside the drop and drop shape oscillations.
The cooling rate of an array of mono-dispersed water drops with diameters between 2.5 and 6.1 mm, falling in an upward-flowing air stream with air velocities between 0.5 and 2.5 in/s, was determined experimentally for drops falling through heights between 1.1 and 3.1 in. Correlations for the governing heat and mass transfer coefficients were determined from the experimental data.

Comprar $25.00 Check subscription Éticas y mala práctica de publicación Recomendado para Mi Bibliotecario Marcar esta Página como Favoritos