ISSN Online: 2377-424X
ISBN Print: 978-1-56700-421-2
International Heat Transfer Conference 15
Heat Transter Enhancement
Table des matières
Numerical and Experimental Studies of the Flow and Heat Transfer in Circular Tubes with Straight Frame Rotor Inserts
pages 3883-3893
DOI: 10.1615/IHTC15.hte.009123
A Numerical and Experimental Study on Flow and Heat Transfer Characteristics of Viscoelastic Fluid in a Serpentine Channel
pages 3895-3909
DOI: 10.1615/IHTC15.hte.009615
Numerical Investigation of Benard-Marangoni Convection of Paramagnetic Liquid in Annular Layers
pages 3911-3923
DOI: 10.1615/IHTC15.hte.009974
Investigation of Heat Exchange and Hydrodynamics Parameters in Annular Channels with Interacting Swirling Flows
pages 3925-3935
DOI: 10.1615/IHTC15.hte.009062
Numerical Investigation of Fluid Flow and Heat Transfer Characteristics of Partial Length Pin Fins in Vertical Parallel Plate Channel
pages 3937-3948
DOI: 10.1615/IHTC15.hte.008825
Thermal Performance of Nanofluids in Microchannel Equipped with a Synthetic Jet Actuator
pages 3949-3963
DOI: 10.1615/IHTC15.hte.009372
The Effect of a Crossed Electromagntic Field on Mixed Convection of a Low Pr Fluid in a Vertical Duct
pages 3965-3980
DOI: 10.1615/IHTC15.hte.009259
An Analysis of Paramagnetic Fluid Thermal Convection in a Concentric Annuli under Strong Magnetic Field Gradient
pages 3981-3995
DOI: 10.1615/IHTC15.hte.009950
A Numerical Study of Fluid and Heat Transfer Performance of Heat Exchangers with Novel Short-Circuit Prevention Helical Baffles
pages 3997-4006
DOI: 10.1615/IHTC15.hte.008750
Numerical Study of Flow and Heat Transfer Characteristics of Different Distributed Corrugated Tube Bundles
pages 4007-4020
DOI: 10.1615/IHTC15.hte.009424
Mathematical Derivation on Heat Transfer Improvement of the Air-Cooled Condenser Cell in a Power Plant
pages 4021-4029
DOI: 10.1615/IHTC15.hte.008727
Analysis on Optimal Configuration of Air-Foil Shaped Printed Circuit Heat Exchanger in Supercritical Carbon Dioxide Power Cycle
pages 4031-4042
DOI: 10.1615/IHTC15.hte.009931
Model-Based Shape Optimization of Three-Dimensional Complex Structure for Heat Transfer Enhancement in Single-Phase Flows
pages 4043-4048
DOI: 10.1615/IHTC15.hte.008867
Thermal-Hydraulic Performance of a Printed Circuit Heat Exchanger in a CO2-H2O Heat Exchange Process under Different Mass Flow Rates
pages 4049-4063
DOI: 10.1615/IHTC15.hte.009180
Heat Transfer Characteristics in Forced Convection Through a Rectangular Channel with V-Shaped Rib Roughened Surfaces
pages 4065-4072
DOI: 10.1615/IHTC15.hte.009262
The Influence of the Fin Type and Base Tube Diameter of Serrated and Solid-Fin Tubes on the Heat Transfer and Pressure Drop Performance
pages 4073-4084
DOI: 10.1615/IHTC15.hte.008718
Heat Transfer Enhancement in Heat Exchanger with Dimpled/ Protruded Surface
pages 4085-4096
DOI: 10.1615/IHTC15.hte.008827
Pool Boiling of Hydrocarbon Mixture in Kettle-Reboiler with Low-Finned Tubes
pages 4097-4110
DOI: 10.1615/IHTC15.hte.009864
In-Tube Convective Heat Transfer Charateristics of Co2-Hydrate Mixture
pages 4111-4118
DOI: 10.1615/IHTC15.hte.009299
Heat Transfer Performance of a Channel Flow with Aluminum Fiber Layers (Comparison with Aluminum Porous Foams)
pages 4119-4129
DOI: 10.1615/IHTC15.hte.009080
Heat Transfer Near Injection Hole by Shock and Boundary Layer Interaction in the Supersonic Flowfield
pages 4131-4136
DOI: 10.1615/IHTC15.hte.010554
Non-Similar Heat Transfer Characteristics Associated with Nanofluid Forced Convection Cooling and Heating
pages 4137-4150
DOI: 10.1615/IHTC15.hte.008562
A Heat Transfer Optimization for Reducing Thermal and Flow Resistances
pages 4151-4162
DOI: 10.1615/IHTC15.hte.008571
Thermal Fluid Flow Transport Characteristics in Pipe Flow Using Graphene-Oxide-Nanofluid
pages 4163-4169
DOI: 10.1615/IHTC15.hte.008689
Heat Transfer Enhancement in Tangential Injection Induced Swirl Flows
pages 4171-4183
DOI: 10.1615/IHTC15.hte.008801
Evaluation of Herringbone Wavy Fin Based Heat Exchanger for Heat Transfer Enhancement in Automobile Exhaust Energy Harvesting Systems
pages 4185-4199
DOI: 10.1615/IHTC15.hte.009825
Natural Convection in an Open-Ended Channel Under Staggered Thermal Boundary Conditions. Application to the Control of the Free Cooling in Photovoltaic Double-Skin Facades.
pages 4201-4214
DOI: 10.1615/IHTC15.hte.009969
Thermal and Hydraulic Characteristics of SCO2 in a Horizontal Tube at High Reynolds Number
pages 4215-4227
DOI: 10.1615/IHTC15.hte.008747
An Experimental Study of Heat Transfer in the Turn Region of a U-Bend channel with Various Ribs
pages 4239-4252
DOI: 10.1615/IHTC15.hte.008864
Enhancement of Heat Transfer Performance by Using Sawtooth Fin Structure in the Multiport Microchannel Flat Tube
pages 4253-4263
DOI: 10.1615/IHTC15.hte.008904
Entransy Balance Equation for Heat Transfer with Phase Change
pages 4265-4278
DOI: 10.1615/IHTC15.hte.008491
Heat Transfer Measurements in a Swirl Chamber Using the Transient Liquid Crystal Technique
pages 4279-4289
DOI: 10.1615/IHTC15.hte.009231
Impingement Cooling with Spent Flow in the Blade Leading Edge Using Double Swirl Chambers
pages 4291-4305
DOI: 10.1615/IHTC15.hte.008669
Experimental Study and Prediction of Film Cooling Effectiveness for a Guide Vane in Heavy Gas Turbine
pages 4307-4318
DOI: 10.1615/IHTC15.hte.009965
An Investigation into Momentum and Temperature Fields of a Meso-Scale Slot Synthetic Jet for a Small Jet-to-Surface Spacing
pages 4319-4330
DOI: 10.1615/IHTC15.hte.008319
Transient Heat Transfer for a Twisted Plate in Forced Convection Flow of Helium Gas
pages 4331-4341
DOI: 10.1615/IHTC15.hte.008667
Heat Transfer Analysis of Aluminum Honeycomb Panels Incorporating Microencapsulated PCM
pages 4343-4354
DOI: 10.1615/IHTC15.hte.008426
A Numerical-Experimental Study of Heat Transfer Enhancement Using Unconfined Steady and Pulsating Turbulent Air Jet Impingement
pages 4369-4381
DOI: 10.1615/IHTC15.hte.008765
Applying Phase Separation of a Solvent System with a Lower Critical Solution Temperature for Enhancement of Cooling Rates by Forced and Free Convection
pages 4383-4397
DOI: 10.1615/IHTC15.hte.008983
Unravelling Convective Heat Transfer in the Rotated Arc Mixer
pages 4399-4410
DOI: 10.1615/IHTC15.hte.009271
Effect of Surface Orientation on the Rewetting Phenomena during Jet Impingement Cooling
pages 4411-4419
DOI: 10.1615/IHTC15.hte.009839
Carbon Nanotube as Thermal Interface Material Enhanced with Liquid Metal Alloy
pages 4421-4430
DOI: 10.1615/IHTC15.hte.009448
Application of Heat Transfer Technology with Phase Change Inhibited on Integrated Heat Deriving and Radiating Systems
pages 4431-4443
DOI: 10.1615/IHTC15.hte.008700
Geometric Optimisation of Multi-Layered Microchannel Heat Sink with Different Flow Arrangements
pages 4445-4455
DOI: 10.1615/IHTC15.hte.009148