Inscrição na biblioteca: Guest
Início Arquivos Thermal Letter Representantes Futuras reuniões Assembléia das Conferências Internacionais de Transferência de Calor
International Heat Transfer Conference 13

ISSN: 2377-424X (online)
ISSN: 2377-4371 (flashdrive)

FLOW PATTERN AND VOID FRACTION IN AN ADVANCED TWO-PHASE FLOW THERMOSYPHON LOOP

Rahmatollah Khodabandeh
Royal Institute of Technology (KTH), Stockholm, Sweden

D. Haglind
Royal Institute of Technology (KTH), Stockholm, Sweden

Björn Palm
Royal Institute of Technology (KTH); Department of Energy Technology, Brinellvagen 60,100 44 Stockholm, Sweden

DOI: 10.1615/IHTC13.p12.150
11 pages

Resumo

Gas-liquid two-phase flow pattern is visualized for Isobutane in semi-circular tubes of 1.41 mm hydraulic diameter and height of 13.6 mm at heat flux ranging from 4.2 to 291.3 kW/m2 to the system. The evaporator is made of a copper half and a glass half, which have been glued together. The glass half enabled the visualization of the flow. In order to visualize the flow regime and measure the void fraction in the riser, a glass tube riser is used. To measure the void fraction in the riser a quick-closing valve method is used. Interesting phenomena, such as the possible occurrence of partial dryout and backflow is also discussed. The result from this experiment is compared with the available two-phase flow map for large diameter channel.
In order to investigate the influence of pressure level on flow pattern, different reduced pressures are used.

Compra $25.00 Check subscription Download do registro MARC Ética e negligência em publicaçãoes Recomendado ao My Librarian Inserir indicador nessa página
 

Biblioteca digital IHTC

Measurement of fluid temperature with an arrangement of three thermocouples