Inscrição na biblioteca: Guest
Início Arquivos Thermal Letter Representantes Futuras reuniões Assembléia das Conferências Internacionais de Transferência de Calor
International Heat Transfer Conference 13

ISSN: 2377-424X (online)
ISSN: 2377-4371 (flashdrive)

International Heat Transfer Conference 13
2006, 13-18 August, Sydney, Australia

The papers presented at the Thirteenth International Heat Transfer Conference, which was held in Sydney, Australia under the joint auspices of the Australasian Fluids and Thermal Engineering Society and Engineers Australia on behalf of the Assembly for International Heat Transfer Conferences. IHTC-13 was the first in this long-running series to be held in the Southern Hemisphere.

IHTC-13 offered 33 Keynote Lectures, including lectures by the winners of the Max Jakob and Donald Q. Kern Awards of ASME and AIChE; 657 contributed papers (all of which were peer reviewed by members of the International Scientific Committee and their colleagues, to whom we are greatly indebted); seven panel discussions; an Open Forum for the presentation of last minute work; and an exhibition of books and journals. There was an extensive programme of social events and technical visits.

Para acessar o texto completo dos procedimentos de conferências, clique aqui

Comitê Científico Internacional

Milton, Brian E. Chair
Emeritus Professor, School of Mechanical and Manufacturing Engineering The University of New South Wales Sydney, NSW 2052 Australia

Oosthuizen, Patrick H.
Department of Mechanical and Materials Engineering, Queen's University, 130 Stuart Street, Kingston, ON, K7L 3N6, Canada

Guo, Zeng-Yuan
Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Engineering Mechanics, Tsinghua University, Haidian District, Beijing 100084, China

Hahne, Erich
Institut fur Thermodynamik und Warmetechnik, Universitat Stuttgart, 70550 Stuttgart, Germany

Murthy, S.Srinivasa
Refrigeration and Airconditioning Laboratory, Dept. of Mechanical Engineering, Indian Institute of Technology, Madras, Chennai - 600 036, INDIA

Hetsroni, Gad
Department of Mechanical Engineering, Technion- Israel Institute of Technology, Technion City, 32000 Haifa, Israel

Cumo, Maurizio
ENEA, Rome; DINCE, University of Rome “La Sapienza”, Corso Vittorio Emanuele II, 244, Rome, Italy

Kasagi, Nobuhide
Center for Research and Development Strategy, Japan Science and Technology Agency; Department of Mechanical Engineering, The University of Tokyo, Hongo, Bunkyo-ku, Tokyo 113-8656, Japan

Kim, Sung Jin
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Daejeon 34141, Republic of Korea

van Steenhoven, Anton A.
Faculty of Mechanical Engineering, Energy Technology Section, Den Dolech 2, 5600MB, Eindhoven, The Netherlands

Coelho, Pedro J. M.
Instituto Superior Technico Department of Mechanical Engineering Av. Rovisco Pais, 1049-001 Lisbon Portugal

Meyer, Josua Petrus
Department of Mechanical and Aeronautical Engineering, University of Pretoria, Pretoria, Private Bag X20, Hatfield, 0028, South Africa

Thome, John R.
Laboratory of Heat and Mass Transfer (LTCM), Ecole Polytechnique Fédérale de Lausanne (EPFL), Station 9, CH-1015 Lausanne, Switzerland

Leontiev, Alexander
Joint Institute for High Temperatures

Hewitt, Geoffrey F.
Department of Chemical Engineering & Chemical Technology Imperial College of Science, Technology & Medicine Prince Consort Road, London SW7 2B Y, England

Jaluria, Yogesh
Department of Mechanical and Aerospace Engineering Rutgers-New Brunswick, The State University of New Jersey Piscataway, NJ 08854, USA

El-Genk, Mohamed S.
Institute for Space and Nuclear Power Studies; Mechanical Engineering Department; Nuclear Engineering Department, Chemical & Biological Engineering Dept., University of New Mexico, Albuquerque, New Mexico, 87131 USA

International Heat Transfer Conference 13

Bio Heat Transfer DOI: 10.1615/IHTC13.p29
Boiling DOI: 10.1615/IHTC13.p28
Conduction DOI: 10.1615/IHTC13.p27
Combustion, Fire DOI: 10.1615/IHTC13.p26
Condensation DOI: 10.1615/IHTC13.p25
Energy DOI: 10.1615/IHTC13.p24
Environmental Heat Transfer DOI: 10.1615/IHTC13.p23
Equipment DOI: 10.1615/IHTC13.p22
Experimental Techniques DOI: 10.1615/IHTC13.p21
Forced Convection DOI: 10.1615/IHTC13.p20
Fouling DOI: 10.1615/IHTC13.p19
Heat Exchangers DOI: 10.1615/IHTC13.p18
Heat Transfer Enhancement DOI: 10.1615/IHTC13.p17
Jets DOI: 10.1615/IHTC13.p16
Keynote Papers DOI: 10.1615/IHTC13.p30
Mixed Convection DOI: 10.1615/IHTC13.p15
Microscale DOI: 10.1615/IHTC13.p14
Manufacturing DOI: 10.1615/IHTC13.p13
Multiphase DOI: 10.1615/IHTC13.p12
Materials Processing DOI: 10.1615/IHTC13.p11
Mass Transfer DOI: 10.1615/IHTC13.p10
Math and Comp DOI: 10.1615/IHTC13.p9
Nanoscale DOI: 10.1615/IHTC13.p8
Nuclear DOI: 10.1615/IHTC13.p7
Natural Convection DOI: 10.1615/IHTC13.p6
Particulate and Porous DOI: 10.1615/IHTC13.p5
Radiation DOI: 10.1615/IHTC13.p4
Solidification DOI: 10.1615/IHTC13.p3
Thermophisics DOI: 10.1615/IHTC13.p2
Turbulence DOI: 10.1615/IHTC13.p1

Artigos mais baixados


Biblioteca digital IHTC

Measurement of fluid temperature with an arrangement of three thermocouples