Доступ предоставлен для: Guest

ISSN Online: 2377-424X

ISBN Print: 0-85295-345-3

International Heat Transfer Conference 10
August, 14-18, 1994, Brighton, UK

DIRECT CONTACT BOILING OF IMMISCIBLE LIQUIDS

Get access (open in a dialog) DOI: 10.1615/IHTC10.4540
pages 37-43

Аннотация

The paper reports the results of an experimental investigation on direct contact boiling of immiscible liquids. The continuous phase, water, is under stagnant conditions, while the dispersed one, freon 114, is injected in the test section with different velocity and thermodynamic conditions through a nozzle. The injection system has been designed to vary the quantity of injected refrigerant and/or the liquid injection velocity.
The test section is a Plexiglas vertical cylinder 72 mm inner diameter, 2.0 m long. Experimental data are obtained from high-speed movies of the continuous phase level during and after the freon 114 injection, as well as from the movies of the rising boiling dispersed phase (injected under nearly saturation conditions). Vaporization rate has been characterized as a function of thermal hydraulic conditions (i.e. water temperature, system pressure and freon mass flow rate). Direct contact boiling efficiency was derived by the evaluation of the fraction of freon that did not undergo the boiling process during the transit in the test section.