International Heat Transfer Conference 16 - Том 10, 2018, Cooling and Thermal Management - International Heat Transfer Conference Digital Library

Главная > Архив > IHTC-16 > Cooling and Thermal Management

International Heat Transfer Conference 16

2018, 10-15 August, Beijing, China

Cooling and Thermal Management

Содержание:

NOZZLE ARRAY SCALING EFFECTS ON THE THERMAL/HYDRAULIC PERFORMANCE OF LIQUID JET IMPINGEMENT COOLERS FOR HIGH PERFORMANCE ELECTRONIC APPLICATIONS Tiwei Wei, Herman Oprins, V. Cherman, Ingrid De Wolf, Eric Beyne, Martine Baelmans pages 3631-3638 DOI: 10.1615/IHTC16.ctm.022144

NUMERICAL SIMULATION OF PULSATING HEAT PIPE WITH SURFACTANT SOLUTIONS Durga Bastakoti, Hongna Zhang, Wei-Hua Cai, Feng-Chen Li pages 3639-3645 DOI: 10.1615/IHTC16.ctm.022279

THE ENERGY EFFICIENCY ANALYSIS OF DATA CENTER COOLING BASED ON SEPARATED HEAT PIPE Tao Wang, Yuhua Li, Huan Liu, Lei Zhang, Yuyan Jiang, Dawei Tang pages 3647-3654 DOI: 10.1615/IHTC16.ctm.022335

ANALYSIS OF THE TWO-LAYERED MINI/MICRO-CHANNEL HEAT SINK BASED ON LIQUID METAL AND WATER Yujie Ding, Sicong Tan, Jing Liu pages 3655-3661 DOI: 10.1615/IHTC16.ctm.022493

SIMULATION AND EXPERIMENTAL STUDY OF A HYBRID-POWER GAS ENGINE HEAT PUMP SYSTEM Tao Chen, Liang Cai, Xiaofan Ma pages 3663-3670 DOI: 10.1615/IHTC16.ctm.022690

HEAT TRANSFER ENHANCEMENT OF SOLID-LIQUID PHASE CHANGE USING CUBIC BOUNDARY Yutao Huo, Xuan Zhang, Zhonghao Rao pages 3671-3679 DOI: 10.1615/IHTC16.ctm.022704

THERMAL PERFORMANCE ANALYSIS OF MICRO-CHANNEL HEAT SINK WITH NON-UNIFORM METAL FOAM DESIGN Yongtong Li, Liang Gong, Minghai Xu pages 3681-3688 DOI: 10.1615/IHTC16.ctm.022760

HYBRID WICK VAPOR CHAMBER THERMAL PERFORMANCE EVALUATION FOR HIGH HEAT FLUX APPLICATION BY AIR COOLING Feng Zhou, Tianzhu Fan, Yanghe Liu, Ercan M. Dede pages 3689-3697 DOI: 10.1615/IHTC16.ctm.022763

NUMERICAL ANALYSIS OF THERMAL PERFORMANCE OF A SWIRL COOLING TUBE WITH DIMPLES AT THE WALL Yuyang Liu, Tian Xia, Yu Rao, Bernhard Weigand pages 3699-3705 DOI: 10.1615/IHTC16.ctm.022829

IMPROVING FAST REFILL EFFICIENCY OF COMPRESSED NATURAL GAS BY PRE-CHILLING Aiqing Lan, Guoyu Zhang, Ri Li, Joshua Brinkerhoff pages 3707-3714 DOI: 10.1615/IHTC16.ctm.022853

CELL SPACING OPTIMIZATION OF BATTERY PACK IN PARALLEL AIR-COOLED BATTERY THERMAL MANAGEMENT SYSTEM WITH U-TYPE FLOW Kai Chen, Shuangfeng Wang pages 3715-3723 DOI: 10.1615/IHTC16.ctm.022966

EXPERIMENTAL INVESTIGATION ON THE THERMAL PERFORMANCE OF A PCM BASED CYLINDRICAL HEAT SINK WITH MULTIPLE PCMS Girish kumar M, Srikanth R, Chakravarthy Balaji pages 3725-3733 DOI: 10.1615/IHTC16.ctm.022999

SHAPE OPTIMIZATION TO IMPROVE FILM-COOLING PERFORMANCE FOR LAIDBACK FAN-SHAPED FILM COOLING HOLE ON THE SUCTION SURFACE OF A TURBINE VANE Ying Huang, Jingzhou Zhang , Chun-hua Wang , Xing-dan Zhu pages 3735-3758 DOI: 10.1615/IHTC16.ctm.023058

A NUMERICAL ANALYSIS OF THE APPLICABILITY OF SELF-SIMILAR HEAT SINK FOR COOLING ELECTRICAL EQUIPMENTS WITH DIFFERENT SIZES Wei Tang, Licheng Sun, Jingjing Bao, Guo Xie, Zhengyu Mo, Jiguo Tang pages 3759-3767 DOI: 10.1615/IHTC16.ctm.023094

NUMERICAL MODELING AND OPTIMIZATION OF ELECTROMAGNETIC PUMP TOWARDS COMPACT DRIVING METAL COOLANT Xu-Dong Zhang, Yi-Xin Zhou, Xiao-Hu Yang, Sicong Tan, Jing Liu pages 3769-3774 DOI: 10.1615/IHTC16.ctm.023103

EFFECT OF HEAT TRANSFER ENHANCEMENT WITH JET COOLING BETWEEN OUTER AND SLOTTED INNER CYLINDERS IN AN ELECTRICAL ROTATING MACHINE Tomohisa Yuasa, Yuto Honma, Mitsuyoshi Ejiri, Akiko Kaneko, Yutaka Abe pages 3775-3780 DOI: 10.1615/IHTC16.ctm.023107

TOWARDS ENERGY EFFICIENT LATENT HEAT STORAGE TANKS WITH HEAT TRANSFER FLUID CHANNELS AND FINITE INLET POWER Bart Peremans, Maarten Blommaert, Jan Diriken, Martine Baelmans pages 3781-3788 DOI: 10.1615/IHTC16.ctm.023248

MEASUREMENT OF HEAT TRANSFER ON TURBINE BLADE ENDWALL WITH UPSTREAM WAKES AT DIFFERENT RELATIVE POSITIONS Sehjin Park, Ho-Seong Sohn, Hyung-Hee Cho, Yang Seok Han, Osamu Ueda pages 3789-3794 DOI: 10.1615/IHTC16.ctm.023397

NUMERICAL SIMULATION OF HEAT TRANSFER ENHANCEMENT FOR COPPER FOAM HEAT SINK IN ELECTRONIC DEVICES USING WATER BASED BN NANOFLUIDS Gan Zhang, H. Cao, M. E. Navarro, J.W. Pomeroy, C. Yuan, M. Kuball, Yulong Ding pages 3795-3802 DOI: 10.1615/IHTC16.ctm.023451

PARAMETRIC STUDY AND OPTIMIZATION OF FLOW AND HEAT TRANSFER CHARACTERISTICS IN MICROGAPS WITH LONGITUDINAL VORTEX GENERATORS ARRAY L. Jia, J.G. Qu, Jianfei Zhang pages 3803-3810 DOI: 10.1615/IHTC16.ctm.023458

THERMAL PERFORMANCE OF HOLLOW HYBRID FIN HEAT SINKS WITH IMPINGING FLOW Nico Setiawan Effendi, Byoung Guk Kim, Kyoung Joon Kim pages 3811-3821 DOI: 10.1615/IHTC16.ctm.023466

NUMERICAL INVESTIGATION ON THE PERFORMANCE OF TRANSPIRATION COOLING COMBINED WITH FILM COOLING Rui Ding , Fei He, Jianhua Wang, Longsheng Tang , Guangqi Dong pages 3823-3832 DOI: 10.1615/IHTC16.ctm.023577

COMPACT LIQUID COOLING SYSTEM FOR HIGH POWER IGBT MODULES IN EV/HEV APPLICATIONS Seokkan Ki, Jooyoung Lee, Seunggeol Ryu, Youngsuk Nam pages 3833-3839 DOI: 10.1615/IHTC16.ctm.023833

THE ENTHALPY-POROSITY METHOD WITH A RECTANGULAR SPECIFIC HEAT CURVE Wim Beyne, Bernd Ameel, Alvaro de Gracia, Gabriel Zsembinszki, Luisa F Cabeza, Michel De Paepe pages 3841-3848 DOI: 10.1615/IHTC16.ctm.023939

EXPERIMENTAL INVESTIGATION ON HIGH HEAT FLUX SPRAY COOLING USING WATER ON COATED AND STRUCTURED SURFACES Ranjith Kandasamy, Jinlong Xie , Teck Neng Wong , Fei Duan, Edwin Hang Tong Teo, Tony Siu Hon Tsang, Roland Yingjie Tay pages 3849-3856 DOI: 10.1615/IHTC16.ctm.023977

INVESTIGATION OF THERMAL DESIGN OF HEAT CONDUCTION PANEL BY TOPOLOGY OPTIMIZATION S. Kajiwara, Takashi Fukue, T. Yamada, K. Hirose, S. Nishiwaki, K. Ohtomi, Tomoyuki Hatakeyama, Masaru Ishizuka pages 3857-3866 DOI: 10.1615/IHTC16.ctm.024060

MULTI-PHYSICS ANALYSIS OF THE THERMAL BEHAVIOR OF INDUCTOR BY USING OPEN-SOURCE SOFTWARE Mengyi Zheng, Hong Duc Doan, Kazuyoshi Fushinobu pages 3867-3872 DOI: 10.1615/IHTC16.ctm.024367

EXPERIMENTAL INVESTIGATION OF GAS THROTTLING IN MICROCHANNELS FOR ELECTRONIC COOLING Jianhua Weng, Hang Zhang, Geng Hui, Xiaoyu Cui, Tongyun Zhang, Tenghui Liu pages 3873-3880 DOI: 10.1615/IHTC16.ctm.021954

MODELING AND EXPERIMENTAL ANALYSIS OF HEAT TRANSFER FOR POWER ELECTRONIC MODULE INTEGRATED WITH PHASE CHANGE THERMAL MANAGEMENT SYSTEM Yiyi Chen, Bo Li, Yuying Yan, Yangang Wang pages 3881-3888 DOI: 10.1615/IHTC16.ctm.021962

LOW MELTING POINT METAL ENABLED PCM HEAT SINK AGAINST HIGH HEAT FLUX THERMAL SHOCK Xiao-Hu Yang, Sen Chen, Xin-Lin Xu , Jing Liu pages 3889-3894 DOI: 10.1615/IHTC16.ctm.022097

VORTEX PROPAGATION IN AIR FLOWS GENERATED BY PIEZOELECTRIC FANS AND THEIR CORRELATION WITH FAN COOLING POWER EFFICIENCY Navid Dehdari Ebrahimi, Zezhi Zeng, Y. Sungtaek Ju pages 3895-3902 DOI: 10.1615/IHTC16.ctm.022381

NUMERIC STUDY OF SURFACE ROUGHNESS IN FLAT MICROCHANNEL HEAT SINK Hui Lu, Liang Gong, Minghai Xu pages 3903-3909 DOI: 10.1615/IHTC16.ctm.022762

HEAT TRANSFER MODELLING OF A SUPERCAPACITOR STACK R. Zhao, Dezheng Darson Li, Ann Lee, N. M. Kwok, Guan Heng Yeoh pages 3911-3918 DOI: 10.1615/IHTC16.ctm.022832

REDUCED WORKING TEMPERATURE OF QUANTUM DOTS-LIGHTEMITTING DIODES BY QDS@SILICA-ON-CHIP STRUCTURE Bin Xie, YanHua Cheng, Xingjian Yu, Bofeng Shang, Kai Wang, Xiaobing Luo pages 3919-3926 DOI: 10.1615/IHTC16.ctm.022857

SUSPENSION AND WORKING PERFORMANCE OF THE HYDRODYNAMICALLY LEVITATED MICRO-PUMP FOR LIQUID COOLING SYSTEM Ruikang Wu, Wei Lan, Bin Xie, Xingjian Yu, Bofeng Shang, Jie Sun, Run Hu, Xiaobing Luo pages 3927-3935 DOI: 10.1615/IHTC16.ctm.022859

NUMERICAL STUDY ON MULTI-SCALE HEAT TRANSFER IN ANNULUS HEATED BY NON-UNIFORM HEAT FLUX Di Li, Zhi-Hong Wang, Zeng-Yao Li pages 3937-3945 DOI: 10.1615/IHTC16.ctm.023115

PRESSURE DROP FOR THREE-DIMENSIONAL RECTANGULAR MICROCHANNELS Liangbin Su, Hao Ma, Peng Liang, Niya Ma, Xiaoru Ning, Zhipeng Duan, Xin Zhang pages 3947-3954 DOI: 10.1615/IHTC16.ctm.023173

EXPERIMENTAL INVESTIGATION ON THE EFFECT OF FIN LENGTH ALLOCATION FOR THE PCM MELTING ENHANCEMENT Chenzhen Ji, Zhen Qin, Zhenghua Low, Swapnil Dubey, Fook Hoong Choo, Fei Duan pages 3955-3963 DOI: 10.1615/IHTC16.ctm.023264

ENVIRONMENTAL TEMPERATURE EFFECT AND THERMAL MANAGEMENT OF LITHIUM-ION BATTERY WITH PHASE CHANGE MATERIAL/HEAT PIPE COUPLED SYSTEM Shuangfeng Wang, Weixiong Wu, Sihui Hong, Wei Wu, Kai Chen pages 3965-3972 DOI: 10.1615/IHTC16.ctm.023343

AN APPROXIMATION METHOD FOR HEAT TRANSFER PREDICTION IN A MAGNETIC SUSPENSION MACHINE Xinlong Li, Hailin Gu, Peng Qian, Feiyang Sun, Minghou Liu pages 3973-3980 DOI: 10.1615/IHTC16.ctm.023422

THERMOHYDRODYNAMICS OF FERROFLUIDIC FLOW WITH PERIODIC PULSATION UNDER THE EFFECT OF STATIC AND ALTERNATING MAGNETIC FIELD-: A NUMERICAL STUDY Sudip Shyam, Balkrishna Mehta, Pranab Kumar Mondal pages 3981-3988 DOI: 10.1615/IHTC16.ctm.023439

AN EXPERIMENTAL INVESTIGATION OF COOLING CHARACTERISTICS AT A VANE LAMINATED END-WALL Wei Wang, Jian Pu, Jianhua Wang, Yongxian Luan, Binpeng Kang pages 3989-3996 DOI: 10.1615/IHTC16.ctm.023446

UNDERSTANDING THE LOCATION OF HOT SPOTS IN TRANSFORMER WINDINGS Tor Laneryd, Andreas Gustafsson, Sead Travancic pages 3997-4004 DOI: 10.1615/IHTC16.ctm.023498

OPTIMAL LIQUID COOLING PERFORMANCE OF 2.5D-SICS WITH PIN-FIN ENHANCED MICRO-GAPS USING DESIGN OF EXPERIMENT Yuanchen Hu, Yogendra Joshi pages 4005-4011 DOI: 10.1615/IHTC16.ctm.023633

METALLIZED THREE-DIMENSIONAL CENTROSYMMETRIC MICROSTRUCTURES TO ENHANCE DRY CONTACT THERMAL CONDUCTANCE ACROSS NONFLAT INTERFACES Jin Cui, Liang Pan, Justin A. Weibel pages 4013-4020 DOI: 10.1615/IHTC16.ctm.023666

BIBLIOMETRIC ANALYSIS OF RESEARCH ON ELECTRONIC HOTSPOTS THERMAL MANAGEMENT Yuanchen Hu, Lu Wang pages 4021-4028 DOI: 10.1615/IHTC16.ctm.023708

THERMAL MANAGEMENT OF LITHIUM ION BATTERY MODULE: AIR COOLING STRATEGIES FOR THE HOTSPOTS Zhao Lu, X.Y. Yu, L.C. Wei, L. Y. Zhang, S. Gao, Liwen Jin, Xiangzhao Meng pages 4029-4036 DOI: 10.1615/IHTC16.ctm.023749

EFFECTS OF HOLE GEOMETRY AND CURVED SURFACE ON FILM COOLING EFFECTIVENESS AND HEAT TRANSFER COEFFICIENT MEASURED WITH COMPENSATION OF THREE-DIMENSIONAL HEAT CONDUCTION Shohei Yamamoto, Akira Murata, Jingzu Yee, Yushi Maruyama, Kaoru Iwamoto, Yoji Okita pages 4037-4042 DOI: 10.1615/IHTC16.ctm.023780

THE EFFECT OF THERMAL AND PHYSICAL PARAMETERS OF A LITHIUM ION BATTERY ELECTRODE ON THE INTERNAL CELL RESISTANCE Bereket Tsegai Habte, Fangming Jiang pages 4043-4056 DOI: 10.1615/IHTC16.ctm.023907

IDENTIFICATION OF THERMAL CONDUCTIVITY MIXING MODELS FOR HETEROGENEOUS FOULING DEPOSITS Emilio Diaz-Bejarano, E. Behranvand, Francesco Coletti, M. R. Mozdianfard, Sandro Macchietto pages 4057-4064 DOI: 10.1615/IHTC16.ctm.023965

NUMERICAL MODELING AND EXPERIMENTAL VALIDATION OF A PCM (PHASE CHANGE MATERIAL)-BASED CASCADE COOLING SYSTEM FOR ENHANCED THERMAL MANAGEMENT Suho Kim, Bo-Kyong Kim, Jin-Yong Mok, Seok-Won Kang pages 4065-4070 DOI: 10.1615/IHTC16.ctm.024051

1D SIMULATIONS OF THERMALLY BUFFERED PRISMATIC BATTERIES THROUGH THE APPLICATION OF PCMS Ilya T'Jollyn, Jasper Nonneman, Wim Beyne, Michel De Paepe pages 4071-4078 DOI: 10.1615/IHTC16.ctm.024132

VOLTAGE DEPENDENCE OF HOT SPOT TEMPERATURE ON SIC POWER MOSFET WITH ELECTRO-THERMAL ANALYSIS Risako Kibushi, Tomoyuki Hatakeyama, Kazuhisa Yuki, Noriyuki Unno, Masaru Ishizuka pages 4079-4085 DOI: 10.1615/IHTC16.ctm.024140

A MIXTURE THEORY BASED ENTHALPY POROSITY MODEL FOR PERFORMANCE STUDY OF NANO ENHANCED PCM HEAT SINK Santosh Kumar Sahoo, Prasenjit Rath, Mihir Kumar Das pages 4087-4096 DOI: 10.1615/IHTC16.ctm.024196

ANALYSIS OF THE THERMAL CHARACTERISTICS AND LIFE TIME OF IGBTS BY VARYING THE THERMAL INTERFACE MATERIAL THICKNESS Young Joon Cho, Andras Vass-Varnai, Attila Szel, Hyuk il Kwon pages 4097-4105 DOI: 10.1615/IHTC16.ctm.024314