ISSN Online: 2377-424X
ISBN Print: 978-1-56700-421-2
International Heat Transfer Conference 15
Heat Transter Enhancement
Table of Contents:
Numerical and Experimental Studies of the Flow and Heat Transfer in Circular Tubes with Straight Frame Rotor Inserts
pages 3883-3893
DOI: 10.1615/IHTC15.hte.009123
A Numerical and Experimental Study on Flow and Heat Transfer Characteristics of Viscoelastic Fluid in a Serpentine Channel
pages 3895-3909
DOI: 10.1615/IHTC15.hte.009615
Numerical Investigation of Benard-Marangoni Convection of Paramagnetic Liquid in Annular Layers
pages 3911-3923
DOI: 10.1615/IHTC15.hte.009974
Investigation of Heat Exchange and Hydrodynamics Parameters in Annular Channels with Interacting Swirling Flows
pages 3925-3935
DOI: 10.1615/IHTC15.hte.009062
Numerical Investigation of Fluid Flow and Heat Transfer Characteristics of Partial Length Pin Fins in Vertical Parallel Plate Channel
pages 3937-3948
DOI: 10.1615/IHTC15.hte.008825
Thermal Performance of Nanofluids in Microchannel Equipped with a Synthetic Jet Actuator
pages 3949-3963
DOI: 10.1615/IHTC15.hte.009372
The Effect of a Crossed Electromagntic Field on Mixed Convection of a Low Pr Fluid in a Vertical Duct
pages 3965-3980
DOI: 10.1615/IHTC15.hte.009259
An Analysis of Paramagnetic Fluid Thermal Convection in a Concentric Annuli under Strong Magnetic Field Gradient
pages 3981-3995
DOI: 10.1615/IHTC15.hte.009950
A Numerical Study of Fluid and Heat Transfer Performance of Heat Exchangers with Novel Short-Circuit Prevention Helical Baffles
pages 3997-4006
DOI: 10.1615/IHTC15.hte.008750
Numerical Study of Flow and Heat Transfer Characteristics of Different Distributed Corrugated Tube Bundles
pages 4007-4020
DOI: 10.1615/IHTC15.hte.009424
Mathematical Derivation on Heat Transfer Improvement of the Air-Cooled Condenser Cell in a Power Plant
pages 4021-4029
DOI: 10.1615/IHTC15.hte.008727
Analysis on Optimal Configuration of Air-Foil Shaped Printed Circuit Heat Exchanger in Supercritical Carbon Dioxide Power Cycle
pages 4031-4042
DOI: 10.1615/IHTC15.hte.009931
Model-Based Shape Optimization of Three-Dimensional Complex Structure for Heat Transfer Enhancement in Single-Phase Flows
pages 4043-4048
DOI: 10.1615/IHTC15.hte.008867
Thermal-Hydraulic Performance of a Printed Circuit Heat Exchanger in a CO2-H2O Heat Exchange Process under Different Mass Flow Rates
pages 4049-4063
DOI: 10.1615/IHTC15.hte.009180
Heat Transfer Characteristics in Forced Convection Through a Rectangular Channel with V-Shaped Rib Roughened Surfaces
pages 4065-4072
DOI: 10.1615/IHTC15.hte.009262
The Influence of the Fin Type and Base Tube Diameter of Serrated and Solid-Fin Tubes on the Heat Transfer and Pressure Drop Performance
pages 4073-4084
DOI: 10.1615/IHTC15.hte.008718
Heat Transfer Enhancement in Heat Exchanger with Dimpled/ Protruded Surface
pages 4085-4096
DOI: 10.1615/IHTC15.hte.008827
Pool Boiling of Hydrocarbon Mixture in Kettle-Reboiler with Low-Finned Tubes
pages 4097-4110
DOI: 10.1615/IHTC15.hte.009864
In-Tube Convective Heat Transfer Charateristics of Co2-Hydrate Mixture
pages 4111-4118
DOI: 10.1615/IHTC15.hte.009299
Heat Transfer Performance of a Channel Flow with Aluminum Fiber Layers (Comparison with Aluminum Porous Foams)
pages 4119-4129
DOI: 10.1615/IHTC15.hte.009080
Heat Transfer Near Injection Hole by Shock and Boundary Layer Interaction in the Supersonic Flowfield
pages 4131-4136
DOI: 10.1615/IHTC15.hte.010554
Non-Similar Heat Transfer Characteristics Associated with Nanofluid Forced Convection Cooling and Heating
pages 4137-4150
DOI: 10.1615/IHTC15.hte.008562
A Heat Transfer Optimization for Reducing Thermal and Flow Resistances
pages 4151-4162
DOI: 10.1615/IHTC15.hte.008571
Thermal Fluid Flow Transport Characteristics in Pipe Flow Using Graphene-Oxide-Nanofluid
pages 4163-4169
DOI: 10.1615/IHTC15.hte.008689
Heat Transfer Enhancement in Tangential Injection Induced Swirl Flows
pages 4171-4183
DOI: 10.1615/IHTC15.hte.008801
Evaluation of Herringbone Wavy Fin Based Heat Exchanger for Heat Transfer Enhancement in Automobile Exhaust Energy Harvesting Systems
pages 4185-4199
DOI: 10.1615/IHTC15.hte.009825
Natural Convection in an Open-Ended Channel Under Staggered Thermal Boundary Conditions. Application to the Control of the Free Cooling in Photovoltaic Double-Skin Facades.
pages 4201-4214
DOI: 10.1615/IHTC15.hte.009969
Thermal and Hydraulic Characteristics of SCO2 in a Horizontal Tube at High Reynolds Number
pages 4215-4227
DOI: 10.1615/IHTC15.hte.008747
An Experimental Study of Heat Transfer in the Turn Region of a U-Bend channel with Various Ribs
pages 4239-4252
DOI: 10.1615/IHTC15.hte.008864
Enhancement of Heat Transfer Performance by Using Sawtooth Fin Structure in the Multiport Microchannel Flat Tube
pages 4253-4263
DOI: 10.1615/IHTC15.hte.008904
Entransy Balance Equation for Heat Transfer with Phase Change
pages 4265-4278
DOI: 10.1615/IHTC15.hte.008491
Heat Transfer Measurements in a Swirl Chamber Using the Transient Liquid Crystal Technique
pages 4279-4289
DOI: 10.1615/IHTC15.hte.009231
Impingement Cooling with Spent Flow in the Blade Leading Edge Using Double Swirl Chambers
pages 4291-4305
DOI: 10.1615/IHTC15.hte.008669
Experimental Study and Prediction of Film Cooling Effectiveness for a Guide Vane in Heavy Gas Turbine
pages 4307-4318
DOI: 10.1615/IHTC15.hte.009965
An Investigation into Momentum and Temperature Fields of a Meso-Scale Slot Synthetic Jet for a Small Jet-to-Surface Spacing
pages 4319-4330
DOI: 10.1615/IHTC15.hte.008319
Transient Heat Transfer for a Twisted Plate in Forced Convection Flow of Helium Gas
pages 4331-4341
DOI: 10.1615/IHTC15.hte.008667
Heat Transfer Analysis of Aluminum Honeycomb Panels Incorporating Microencapsulated PCM
pages 4343-4354
DOI: 10.1615/IHTC15.hte.008426
A Numerical-Experimental Study of Heat Transfer Enhancement Using Unconfined Steady and Pulsating Turbulent Air Jet Impingement
pages 4369-4381
DOI: 10.1615/IHTC15.hte.008765
Applying Phase Separation of a Solvent System with a Lower Critical Solution Temperature for Enhancement of Cooling Rates by Forced and Free Convection
pages 4383-4397
DOI: 10.1615/IHTC15.hte.008983
Unravelling Convective Heat Transfer in the Rotated Arc Mixer
pages 4399-4410
DOI: 10.1615/IHTC15.hte.009271
Effect of Surface Orientation on the Rewetting Phenomena during Jet Impingement Cooling
pages 4411-4419
DOI: 10.1615/IHTC15.hte.009839
Carbon Nanotube as Thermal Interface Material Enhanced with Liquid Metal Alloy
pages 4421-4430
DOI: 10.1615/IHTC15.hte.009448
Application of Heat Transfer Technology with Phase Change Inhibited on Integrated Heat Deriving and Radiating Systems
pages 4431-4443
DOI: 10.1615/IHTC15.hte.008700
Geometric Optimisation of Multi-Layered Microchannel Heat Sink with Different Flow Arrangements
pages 4445-4455
DOI: 10.1615/IHTC15.hte.009148