Inscrição na biblioteca: Guest

ISSN Online: 2377-424X

ISBN Print: 978-1-56700-421-2

International Heat Transfer Conference 15
August, 10-15, 2014, Kyoto, Japan

Benchmark Numerical Simulations of Solar Thermoelectric Generators

Get access (open in a dialog) DOI: 10.1615/IHTC15.ecs.009820
pages 1853-1863

Resumo

In this paper, to simplify the design and optimization of thermoelectric generators (TEGs), a threedimensional numerical model is implemented in a computational finite simulation environment (COMSOL). The model can take into consideration the Peltier effect, Thomson effect and Seebeck effect inherent to TEGs. In terms of a p-element TEG, many cases are tested to validate the model and good agreement between numerical predictions and analytical solutions are achieved. To demonstrate the feasibility of the model, benchmark numerical simulations are carried out for a solar thermoelectric generator (STEG) proposed by Kraemer et al. (Nature Materials, 10 (2011) 532-538). The results are in good agreement with reported experimental data for a range of STEG configurations and it is shown that the 3D simulations in this work more closely match the experimental data compared to 1D simulations presented in the literature. Parametric studies on the thermal conductivity of the solar absorber indicate that the STEG efficiency significantly increases (by a factor of 3 approximately) as the thermal conductivity of the solar absorber (kabsorber) varies from 1 to 10 W/(m?K), but levels off at about 40 W/(m?K). Specifically, the STEG efficiency increases only 0.1 % when kabsorber varies from 40 W/(m?K) to 1000 W/(m?K).